Company Introduction and Business Overview
Amtech Esters Limited was incorporated in 2002 and manufactures unsaturated polyester resins (UPR), which serve as matrix material binding composites. The company produces 49 grades of UPR used by fabricators and manufacturers in construction, automotive, electrical, marine, FRP, and decorative products such as buttons. In December 2023, the company acquired Croda Pigments, which manufactures pigment pastes, accelerators, and hardeners. Combined with other products like fiberglass, curing agents, epoxy, and silicone, the company now offers customers a portfolio of 79 products.
Until recently, all production came from the Bahadurgarh plant, which has 2,960 MTPA of resin capacity and operated at 88% of usable capacity in FY26. Much of the work at this plant was manual, and resin was supplied to customers in drums. The company achieved revenue of ₹40.7 Cr in FY26 and listed on the BSE SME platform in September 2026.
New Asoda Plant and Operational Update
The new Asoda plant began commercial production on November 2, 2026, following trial runs that started on October 3, 2026. The plant adds 4,800 MTPA of resin capacity, taking total capacity to 7,760 MTPA (approximately 2.6 times previous capacity). The plant was built using internal accruals with no new borrowings.
The Asoda plant incorporates modern methods that reduce manual work. Resin that was previously supplied in drums is now dispatched directly in tankers, simplifying handling and making supply more dependable. This has increased visibility with customers in the quartz sector, supporting growth.
H1 FY27 Financial Highlights (Consolidated and Unaudited)
- Revenue from operations: ₹27.5 Cr, up 45.7% year-on-year
- Profit after tax: ₹2.3 Cr, up 78% year-on-year
- PAT margin: 8.5%, improved from 6.9% a year ago
- Earnings per share: ₹2.64, up 30% from ₹2.03
- H1 revenue represents approximately 67.5% of full-year FY26 revenue of ₹40.7 Cr
Balance Sheet Position
- Net worth: ₹37 Cr
- Borrowings: ₹0.6 Cr
- Cash: ₹14.1 Cr
IPO Impact and Capital Allocation
The IPO has provided greater visibility with customers, investors, and partners. From the IPO proceeds, ₹8.81 Cr has been invested in the subsidiary Croda Pigments to raise pigment capacity from 382 MTPA to 973 MTPA.
Management Commentary and Outlook
With Asoda operational and FY28 set to be the first full year at enlarged capacity, management expects growth to accelerate in coming quarters. The company provided FY27 revenue guidance of ₹70 Cr, which management described as "conservative" and expressed confidence in exceeding.
Capacity and Utilization Details
- Current total resin capacity: 7,760 MTPA
- New Asoda plant capacity: 4,800 MTPA
- Bahadurgarh plant capacity: 2,960 MTPA
- Expected utilization: 30-40% in November 2026, rising to 60-70% from December 2026 onward
Product and Market Diversification
Currently, 60-70% of revenue comes from button-grade UPR. The company is diversifying into the quartz sector through the new Asoda plant, with expectations that quartz will contribute 50% of revenue next year, while button-grade contribution reduces to 30-35%.
Subsidiary Performance (Croda Pigments)
- H1 FY27 revenue: ₹7-8 Cr
- FY26 revenue: ₹10.5 Cr
- FY27 projection: ₹14-15 Cr (approximately 50% growth)
- Future expansion planned using IPO proceeds
Margin Outlook
- Current EBITDA margin: 17-18%
- Expected improvement: 100-150 basis points due to operational efficiencies from Asoda plant
- PAT margin expected to improve by 50-100 basis points
- FY27 PAT margin guidance: 10-11%
Competitive Landscape
The company is the third-largest UPR manufacturer in Northern India. Main competitors are Revex and Crystic (both unlisted), with monthly capacities of approximately 2,000 MT compared to Amtech's current 200 MT per month.
Future Expansion Plans
- Planning next plant with capacity of 100-125 tons daily (approximately 2,500-3,000 MTPA)
- Target completion by end of FY28
- No immediate capex plans beyond Croda Pigments expansion
- Considering export opportunities in near future
Working Capital and Financing
- Company aims to remain debt-free for term loans
- May require working capital limits as capacity increases
- Current cash position: ₹14.1 Cr as of September 30, 2026
- IPO proceeds allocation: ₹2.4-2.5 Cr for issue expenses, ₹8.81 Cr for subsidiary investment, ₹4.4-4.5 Cr for liability payments, remaining ₹4.4-4.5 Cr for working capital
Dividend Policy
Management indicated that dividends might be considered next year (FY28).
Shareholding Pattern
Pre-listing promoter shareholding was 62-63%. Current promoter shareholding is approximately 45%, with the remainder held by friends and family who have been investors for the last three years.